1:144 Hansa-Brandenburg D.I (synchronized)

$8.97$12.77

A Hansa-Brandenburg D.I with a synchronized Schwarzlose machine gun and standard rudder

Description

This is a paintable 1:144 scale model of a Hansa-Brandenburg D.I. Since many painters choose their own mounting system, no peg is included on the plane. Pegs can be purchased separately in the Accessories section of this catalog.

This model features the standard rudder and a synchronized gun under the exhaust manifold. An early-rudder model is also available. Later models feature the standard rudder and either a canister, top-wing, or synchronized gun.

The Brandenburg D.I was Austria-Hungary’s first native fighter. It was also known as the “KD” Kampf-doppeldecker, or “Star-Strutter” for its unusual strut arrangement, which eliminated the need for bracing wires at the cost of extra weight. This gave the D.I a good amount of speed for its time, but the climb rate and maneuverability suffered.

For armament, a Schwarzlose M7/12 or M.16 machine gun was usually provided in a VKII canister on the top wing, which made it impossible to clear a jam during flight. On some machines the canister was removed and a top-wing gun was mounted firing over the propeller at an angle — it had the advantage that jams could be cleared during flight. On at least five D.Is a synchronized gun was fitted below the exhaust manifold of the 185hp Austro-Daimler engine.

The model is offered in different materials. See the FAQ for a comparison of the different material choices. In the Shipping tab, please note the increased shipping costs for an order with mixed materials.

For more data and gaming info on this plane, see https://linen.miraheze.org/wiki/Brandenburg_D.I.

Additional information

Dimensions 4.4 × 5.9 × 2 cm

Shipping:  Shipping varies from about US$7 to US$15 per order, depending on the destination country.  See your cart for an exact number — the prices may vary with currency fluctuations.  Orders over US$300 may get free shipping (but see the note on mixed materials).

Mixed Materials:  Nylon prints are shipped from a different factory than resin prints, so if you place an order with a mix of Nylon and Resin, you will be charged shipping for each material, and each will arrive separately.

Taxes:  Sales tax — where applicable — will be added for U.S. shipments.  Value-added taxes (VAT) may (or may not) be collected by your postal carrier on receipt, which is known as “Delivery At Place”.  Unfortunately, since my printing and shipping partner has no way of marking shipments as VAT-paid, this website cannot collect VAT on your behalf.

Customs:  Most orders should be small enough to avoid customs duties, but you may want to check your local regulations.  If duties are due, they may be collected by your postal carrier.  E.U. customers may be able to avoid duties by keeping their order under €150.

You may also like…